Chip Vacuum Removal System KN-V200
KN-V200 Chip Vacuum Removal System,
Vacuum Chip Removal System
use the suction spout to safely remove coolants, chips and swarf, the high-power pump delivers sufficient suction to cut the cleaning times for the machine and emulsions to a minimum.
King Nice Technology said that after committing to the development of environmental protection, he deeply understands the serious environmental problems nowadays. He focuses on industrial waste oil and wastewater treatment, and concentrates on oil and water purification products.
At present, the three main products include Impurities / emulsified oil and water purification cycle machine, CNC chip vacuum for water tank bottoms / sediment / bottom powder / sediment, and ultra-purification filter cycle machine for water tank impurities / suspended matter / powder.
▎To solve the cutting of iron filings, aluminum powder, fine sediment...and other long-time deposition in the CNC water tank troubled.
▎Take the air pressure drive way,to avoid pubilc security problems.
▎Widely used in metal cutting, aluminum processing, grinding process, engineering plastics.
▎Patented technology-easy to deal with oily and water-soluble cutting fluid.
▎Patented technology-special dehydration drying method,can clean CNC water tank.processing liquid, sludge can also be a short time to cleat.
▎The maximum filter accuracy can to 1 um.
▎Reduce the CNC machine failure rate, non-performing rate.
▎Water and Coolant are saving.
▎Reduce the cost of CNC machanical downtime and operations.
▎Maintain the tank liquid capacity, reduce temperature rise.
KN-V200 CNC Chip Vacuum Removal System is your reliable partner in maintaining a clean and efficient CNC machining environment, optimizing performance, and saving valuable resources.
Easily Recovered
- To solve the cutting of iron filings,aluminum powder, fine sediment...and other long-time deposition in the CNC water tank troubled.
- Take the air pressure drive way, to avoid pubilc security problems.
- Widely used in metal cutting, aluminum processing,grinding problems, engineering plastics Patented technology-easy to deal with oily and water-soluble cutting fluid.
- patented technology - special dehydration drying method, can clean CNC water tank.
- processing liquid, sludge can also be a short time to cleat.
- the maximun filter accuracy can to 1 um.
| Model | Machine Size mm | Filter L | N.W kg | MAX FLOW min | Air Pump min pressure | MAX Air min | Thickness Filter um | Filter/SUS 304 | ||
|---|---|---|---|---|---|---|---|---|---|---|
| KN-V200 | 540X400X900 | MAX8 | 45 | 200 | 0.5Mpa | 0.6m3/m | 150um~850um | KFS | KFN Optional | KFW Optional |
- KFS Type : Thisis a durable stainless made filter, and no replacement is required.
- KFN & KFW Type : This is a consumable filter, and replacement is periodically required.
