What are the benefits of using an oil-water separator?

The use of oil-water separator has the following benefits:
• Extend the life of the cutting fluid and reduce the frequency of changeovers
• Reduce odor and bacterial growth, and improve the working environment
• Improve machining stability and reduce workpiece contamination
• Reduce maintenance costs and improve the sustainable operation ability of enterprises

What is the cause of the smell of cutting fluid?

The smell of cutting fluid is usually due to:
• Oil stains and impurities accumulate to cause bacteria to grow
• The oil layer in the cutting fluid covers the liquid surface and blocks air contact, causing anaerobic bacteria to multiply
• Filtration equipment is not regularly replaced or is lacking
The use of King Nice oil-water separator can effectively remove oil slicks and impurities, inhibit the source of bacteria, and solve the problem of odor.

What should I do if the cutting fluid foams after using the oil-water separator?

Causes of foam may include:
• The concentration of cutting fluid is too low or the ratio is improper
• Stir too fast
• Cutting fluids contain surfactants or cleaning agent residues
The countermeasures are as follows:
• Check and adjust the cutting fluid concentration to the recommended range
• Slows down the return of liquids to avoid large amounts of air ingress
• In combination with low-foaming cutting fluids

Does the oil-water separator need to be cleaned frequently, maintenance or consumables?

The design of King Nice oil-water separator emphasizes low maintenance and easy maintenance, and the filter can be simply cleaned every week according to the site conditions. The inside of the fuselage is made of stainless steel filter core, and there are no consumables.

How to deal with the oil slick after oil-water separation?

King Nice oil-water separator collects the floating oil to an independent oil discharge barrel, with low water content, and customers can recycle or outsource treatment on a regular basis, without stopping or manual scooping, which is safe, fast and pollution-free.

Do I need to change the existing pipeline or processing process to install the oil-water separator?

No, you don't. King Nice's equipment is an independent design, which can be started by placing it next to the water tank of the processing machine, and there is no need to modify the original processing equipment. According to the size and depth of the water tank, the oil suction device can be selected to flexibly match the height of different water tanks.

Does the use of oil-water separator affect the cooling or lubrication effect of the cutting fluid?

No, it won't. King Nice oil-water separator only separates the floating oil from impurities, which does not destroy the original composition of the cutting fluid, but helps to prolong its physical stability and maintain good cooling and lubrication effect.

Which industries or processing types are suitable for using oil-water separators?

It is suitable for almost all processing industries that use water-soluble cutting fluids, including:
• CNC machining center
• Lathes, milling machines, grinding machines
• Mold processing
• Precision parts manufacturing
• Hardware tool processing
is especially suitable for factories with long processing time and large liquid usage.

What kind of oil can be treated by the oil-water separator?

It mainly deals with non-emulsified oil stains such as lubricating oil, slideway oil, hydraulic oil, cutting oil residue and so on floating on the water surface. In the case of high emulsification or unstable emulsification, it is recommended to use other treatments, such as switching to a stable cutting fluid.

How fast is the processing speed of the oil-water separator? Is it suitable for large processing machines?

King Nice models provide specifications with different processing capacity, which can process 300~1500 liters per hour. The mobile design is suitable for stand-alone operation or centralized processing of the whole plant, and it is flexible to match.

When should I consider introducing an oil-water separator?

When you find the following, it's time to consider using an oil-water separator
• Cutting fluid smells and changes color frequently
• The oil film covers the liquid surface, which affects the processing quality
• Frequent replacement of cutting fluids is time-consuming and consumable
• The smell of the working environment is not good, and the employees report discomfort
, and the early introduction can prevent the expansion of the problem and save costs.

If the cutting fluid contains a large amount of iron filings or particles, can the oil-water separator deal with them together?

King Nice oil-water separator is mainly used for the treatment of liquid surface slick oil, for iron filings and particles, it is recommended to use it with King Nice Technology-Chip Suction Filtration Circulator, which can improve the overall liquid cleanliness and life.

Will the sound be loud during operation? Will it interfere with the work environment?

King Nice model adopts low-noise pneumatic pump, the normal operation volume is less than 70 decibels, suitable for installation in the processing area, does not affect the operation of personnel, and will not cause noise pollution.

Can the separated oil be reused?

It depends on the source of the oil and the degree of pollution. If it is slideway oil and hydraulic oil residual oil, it is usually mixed with a large number of impurities, and it is not recommended to reuse it directly. If the enterprise has the resources, it can further secondary filtration or recycling, and some oil products can be reused.

Do I need to warm up or wait after the device starts?

No, the King Nice oil-water separator is ready to use and does not need to be preheated. Separation of oil slick immediately after air connection, suitable for intermittent or continuous processing environments.

There are multiple processing machines on site, can one machine be used in turn?

Yes. King Nice provides mobile oil-water separators (wheels or carts), which can be moved between multiple machines to achieve multi-tank processing in one machine.

Does the equipment need to run continuously for a long time? Or is it better to deal with it on a regular basis?

It can be operated for a long time or arranged according to the site conditions.

I have emulsified cutting fluid, can I use it too?

Yes. The oil-water separator is particularly effective for incompletely emulsified oil slicks, but if it is a highly stable emulsion, it is recommended to regularly check the emulsification status to avoid the degradation of efficiency caused by the thickening of the oil layer. The use of a separator when the emulsion is unstable can help remove impurities and some oil slicks.

The oil slick on the surface of the cutting fluid is not too obvious, do I still need to use an oil-water separator?

Even if the oil slick is thin, the micro-oil layer that is difficult to distinguish with the naked eye will affect the aeration and antibacterial effect of the liquid, and will lead to the deterioration of the cutting fluid over time. Regular use of oil-water separator can prevent problems and prolong the life of the liquid, which is an important measure for preventive maintenance.

Is there a warranty for King Nice oil-water separator?

Yes. King Nice equipment provides a one-year original factory warranty, and provides long-term maintenance services, during the warranty period, the parts can be repaired or replaced free of charge if they are not damaged by man.

What benefits will be provided along with our equipment?

- Water and Coolant Saving
- Lowered annual replacement costs for cutting fluid
- Reduce the cost of CNC mechanical downtime and personnel operations
- Prolong machine life and improve cutting fluid quality
- Reach ESG environment
- No need to discharge, can reduce the amount of waste oil and wastewater treatment

What is the impact of a rancid coolant?

- Reduce machine life and operated quality and affect processing efficiency
- Deteriorated coolant with large amount of bacteria harming operator's health
- Increase coolant liquids expense for changing
- Environmental harm due to wastewater and spoil coolant

Do you customization support?

Yes, we do customization support. If you provide us with your requirements or drawings, we can offer products tailored to your needs.

Can I use a bottom chip processor for all oil processing and water-based processing?

Yes. Whether it is using fully synthetic cutting fluid, semi-synthetic fluid, water-soluble cutting fluid, or cutting oil for processing, the chip suction filter can effectively separate the bottom chips such as iron filings, aluminum filings, and copper filings, and improve the service life of the processing fluid and the cleaning efficiency of the machine.

What are the benefits of using a bottom chip filter circulator?

Benefits include:
• Reduce manual slotting and downtime
• Extended cutting fluid life
• Maintain machining accuracy and surface quality
• Improve the cleanliness and working environment of the production line
• Reduces the risk of bacteria and odors
• Reduced consumables and disposal costs (filters, detergents, etc.)

What kind of metal material chips can be processed by the bottom chip filter?

Wide range of applications, including iron filings, aluminum filings, stainless steel filings, copper filings, brass filings, etc. Chips of different materials can be effectively removed through the principle of vacuum negative pressure.

Is the installation method of the chip suction filter complicated? Do I need to stop construction?

No downtime. It is easy to install, only need to connect the suction and return lines, and can be used on the same day, without affecting normal production.

Does the treated cutting fluid need additional filtration?

No, you don't. After the chip suction and filtration process, the cutting fluid can be directly reused to maintain processing efficiency and liquid clarity.

Is it difficult to maintain the equipment?

Easy maintenance. The filter barrel can be cleaned after use, and the maintenance workload is reduced.

Can it be used with oil-water separation system?

Yes. The chip suction filter can be used in conjunction with the oil-water separation device to achieve a multi-layer purification effect.

What kind of processing equipment is the chip suction filter suitable for?

It can be used in a wide range of applications, including CNC lathes, milling machines, integrated processing machines, grinding machines, electric discharge machines, etc., all of which can be used together to process the recovery cycle of bottom chips and cutting fluid.

What is the processing capacity of the chip suction filter? Can I share it with multiple machines?

There are a variety of models to choose from for the processing flow (such as 200L~300L per minute), and the centralized processing system can also be configured according to the needs of the site, and multiple machines can be shared to reduce the overall cost.

Is the bottom chip filter circulation machine suitable for continuous processing?

Very suitable. The machine can operate around the clock, reliably recovering and filtering chips.

If the on-site space is limited, can I still use the chip suction filter?

Yes. The equipment is movable, and can be flexibly placed as long as there is a space for one person, which is suitable for workshops with limited space.

How long does it take to see the improvement effect after use?

Immediate results. Often, as soon as the machine is activated, you can see that the cutting fluid is cleared, the lint is removed quickly, the odor is reduced, and the frequency of maintenance and cleaning is greatly reduced.